Pier and Beam Lifts
Pier and Beam Lifts : Raising a Pier & Beam Home
When raising a pier and beam home, it begins with taking level readings throughout the home with a computerized zip level. These readings are then written down for use during the lift to make sure the home remains in a completely leveled position throughout the entire elevation process.
The next step is to measure the dimensions of the home to determine the sizes and number of beams that will be needed to support the home during the lift. The sub floor is inspected prior to beam placement to determine if it’s strong enough to withstand lifting pressure. Sometimes additional shoring (“shores” or “props” are used to support or hold up something weak or unstable) is needed to ensure a successful lift.
Once the beams are in place, hydraulic jacks are locked-in under the beams. Hydraulic hoses are connected on one end to the jacks and on the other to a modern hydraulics unified hydraulic jacking system. The jacks are then pressured to the lifting point, unified and the house is ready to be elevated.
Once the elevation process is complete, the new foundation will be set according to the engineering plans and building codes under your home. Once the home is lowered and secured onto its new foundation, new steps and/or decks can be completed along with the plumbing, mechanical, electrical and all other the other work that would need to be done to get back into your home!
To request a quote for our services, please feel free to contact us via e-mail at firstname.lastname@example.org or call our office at 908-654-8227 / (888) 236-8398. We look forward to hearing from you.